Code: T-WTMPM
Wubbers Triangular Mandrel Pliers Medium
In stock
T-WTMPM
Plier jaws measure approx 9 mm and 8 mm along the triangular sides. The length of each jaw is 34 mm. The large, padded handles have superior comfort for repetitive work and measure 6.75 inches long. Use with 14 AWG (1.6mm)soft wire or finer and 0.6mm dead soft sheet.
| Weight | 139.61 g |
|---|
T-WSMPS Plier jaws measure 5 mm square and 3 mm square. The length of each jaw is 34 mm. The large, padded handles have superior comfort for repetitive work and measure 6.75 inches long.
T-WRTAP05 Multi-Size Wrap 'n Tap Pliers 5-10mm. These pliers are so called because ring stock can be wrapped round the barrel shaped jaw, then tap it slightly on a mandrel and instantly make a complete ring. Very little tapping is necessary and half round wire will not twist, scratch or deform. The pliers are good for looping stock that has a pattern or is hollow.The barrel has three sizes 5, 7 and 10mm to enable you to shape rings in various sizes or make consistent loops. The pliers are 6.5 inches long, made from stainless steel and the handles are PVC covered. The lower jaw is covered with PVC tubing and a spare length is included.
T-WBMPJUM The pliers are 6.75 inches long. These jumbo bail making pliers are good for a number of uses including making large even coils, consistently shaped ear wires, and bails for wire wrapped pieces. The jaws are the same diameter along the whole length, one jaw is 18mm in diameter the other 21mm. the length of the jaw is 35mm.
T-WLOPLL Wubbers Looping Pliers are perfect for creating identical wrapped loops and eye pins over and over again. The Wubbers Looping Pliers are designed to work with 18-gauge wire and will make perfectly round loops with an inside diameter of approximately 4.2mm.
