Code: T-WTMPL
Wubbers Triangular Mandrel Pliers Large
In stock
T-WTMPL
Plier jaws measure approx 14mm and 11mm along the triangular sides. The length of each jaw is 34 mm. The large, padded handles have superior comfort for repetitive work and measure 6.75 inches long. Use with 12 AWG (2mm) soft wire or finer and 0.8mm dead soft sheet.
| Weight | 149.16 g |
|---|
T-WOMPJUM The larger jaws measure approx 19mm by 13mm, the smaller jaw is 15mm by 10mm. The length of each jaw is 34 mm. The large, padded handles have superior comfort for repetitive work and measure 6.75 inches long. Use with 12 AWG (2mm)soft wire or finer and 0.8mm dead soft sheet.
T-WSMPS Plier jaws measure 5 mm square and 3 mm square. The length of each jaw is 34 mm. The large, padded handles have superior comfort for repetitive work and measure 6.75 inches long.
T-WRTAP05 Multi-Size Wrap 'n Tap Pliers 5-10mm. These pliers are so called because ring stock can be wrapped round the barrel shaped jaw, then tap it slightly on a mandrel and instantly make a complete ring. Very little tapping is necessary and half round wire will not twist, scratch or deform. The pliers are good for looping stock that has a pattern or is hollow.The barrel has three sizes 5, 7 and 10mm to enable you to shape rings in various sizes or make consistent loops. The pliers are 6.5 inches long, made from stainless steel and the handles are PVC covered. The lower jaw is covered with PVC tubing and a spare length is included.
T-WTMPM Plier jaws measure approx 9 mm and 8 mm along the triangular sides. The length of each jaw is 34 mm. The large, padded handles have superior comfort for repetitive work and measure 6.75 inches long. Use with 14 AWG (1.6mm)soft wire or finer and 0.6mm dead soft sheet.
