Code: T-WDB2P
Wood Dapping Block with Two Punches. Two hardwood punches and dapping block for shaping cases or removing dents. Wood will not scratch or mar precious metals. The block features different size depressions on each side and is 2 1/4″ (57mm) square.
In stock
T-WDB2P
Wood Dapping Block with Two Punches. Two hardwood punches and dapping block for shaping cases or removing dents. Wood will not scratch or mar precious metals. The block features different size depressions on each side and is 2 1/4″ (57mm) square.
| Weight | 155.21 g |
|---|
T-W7DSB Wood Forming Block. Made of hardwood and hand sanded to a smooth finish. Use this block when working with fine or soft metals and marring could be an issue. Four round depressions: 2 ¼", 2 1/8", 1 7/8" and 1 ¾" diameters. Five U channels, two 90° channels, two 45° grooves
T-DHANVS Round base bench anvil with one flat and oneround horn on a cast steel base. Approx 7cm x 11cm, weight 0.75 kg.
T-WFB Wood Forming Block. Made of hardwood and hand sanded to a smooth finish. Use this block when working with fine or soft metals and marring could be an issue. Four round depressions: 2 ¼", 2 1/8", 1 7/8" and 1 ¾" diameters. Five U channels, two 90° channels, two 45° grooves
T-DDDSET This set not only cuts flat discs, but also forms and cuts cone or domed shaped discs. It comes with a small disc cutter and 21 punches (7 flat, 7 concave, and 7 convex) all nicely packaged in a wooden storage box. Domed discs are formed by using the convex and concave punches with the disc cutter, which cuts seven sizes: 6.3mm (1/4"), 8mm (5/16"), 9.5mm (3/8"), 11mm (7/16"), 12.7mmm (1/2"), 14.3mm (9/16"), and 16mm (5/8").Note the convex and concave punches produce a shallow cone. This set can be used with soft metals up to 1mm thick.
