Description
SS-FREC10
The tube has an internal diameter of 1.0mm and is approx 6mm long. The ring soldered to the end is approx 3.7mm outside diameter, approx 2.5mm id.
SS-FREC10
The tube has an internal diameter of 1.0mm and is approx 6mm long. The ring soldered to the end is approx 3.7mm outside diameter, approx 2.5mm id.
| Weight | 0.05 g |
|---|
SS-FMSE88 Sterling Silver Multi Strand End 8 x 8mm. A circular end ideal for Kumihimo. The internal diameter of the end is approx 6mm, the hole at the end is approx 2mm in diameter. The item has been oxidised and the tumbled to leave the highpoints bright.
SS-FCTEC20 The tube has an internal diameter of approx 2.0mm and is approx 6mm long. One end of the tube is closed off. This fitting is ideal for glueing onto the end of the leather cord to make a neat end.
SS-FCPE2 Sterling Silver Cord Pinch End 2mm. Ideal for leather cord and other similar materials. This size will work with 1.5-2mm cords. Place the cord into the centre of the finding between the four prongs. Place the tips of a Nylon jaw or round nose plier around the outside and gently squeeze. This will bring two opposing leaves into conatct with the cord. Rotate the pliers through 90 degrees and squeeze again, this will bring the remaining two leaves into contact with the cord. Repeat if neccesary until the cord is secure. The ring on the end has an outside diameter of approx 3.5mm.
SS-FCPE3 Sterling Silver Cord Pinch End 3mm. Ideal for leather cord and other similar materials. This size will work with 2.5-3mm cords. Place the cord into the centre of the finding between the four prongs. Place the tips of a Nylon jaw or round nose plier around the outside and gently squeeze. This will bring two opposing leaves into conatct with the cord. Rotate the pliers through 90 degrees and squeeze again, this will bring the remaining two leaves into contact with the cord. Repeat if neccesary until the cord is secure. The ring on the end has an outside diameter of approx 3.5mm.